Για όλους όσους ενδιαφέρονται να χώσουν τα Windows στο αυτοκίνητο τους, το
CarPC blog είναι must see. O J.P Stewart περιγράφει την προσπάθεια του να βάλει αρχικά ένα 1U blade κουτί και μετά ένα mini-ITX στο αυτοκίνητό του, ΜΕ ΤΙΣ ΚΑΛΩΔΙΩΣΕΙΣ ΤΟΥ ΚΑΙ ΤΗΝ ΟΘΟΝΗ ΤΟΥ ΚΑΙ ΤΙΣ ΚΟΝΣΟΛΕΣ ΤΟΥ. Ακόμα και το πλαστικό της οθόνης βάφει ο άνθρωπος! Και φυσικά όλα τα αξεσουάρ, GPS, WiFi, ανιχνευτή ραντάρ.
Τα Specs:
-VIA EPIA M10000 motherboard with 256MB ram
-Travla c158 case with 60W dc/dc ATX power supply
-Slim DVD-ROM drive
-Compact Flash to IDE converter
-4GB laptop hard drive with IDE adapter
-Ituner ITPS
-12V/40A SPST relay
-Microsoft 802.11g USB device
-Generic USB GPS device (gps mouse as its called)
-1x 6x3x2 ABS plastic project box (2 if you count purchased)
-2x plastic standoff mounts (for itps)
-2x brass terminal blocks (for power connections)
-16ft of 6ga stranded copper cable (double insulated)
-L shaped connector for connecting to the battery
-20ft 12ga stranded copper cable
-10ft shielded VGA extender
-15ft USB extender
-20ft four terminal ribbon cable
-1x 8x6x3 ABS plastic project box (2 if you count purchased)
-2x Single pole rocker switches
-1x Momentary red push button
-1x Ecovell 12V->5V converter (2A)
-1x type H adaptaplug to power usb hub
-1x USB 2.0 minihub
-1x Creative USB sound blaster
-1x Xenarc 7" with usb touchscreen
-1x RCA to jeep cd changer adapter
-1x generic compression microphone
-LOTS of quick disconnect connectors
-LOTS of random cabling
-LOTS of heatshrink tubing
-LOTS of elbow grease
Παναγιώτης Καναβός, Freelancer
Twitter: http://www.twitter.com/pkanavos